19
ii
Plug the 3.5mm jack into the top 3.5 mm socket.
See figure 23.
iii
After all previous steps are complete turn rotary
switch to on position and bring power to the
Powervault unit.
The current clamp wire is 10m in length. A
10m extension lead is provided free of charge.
Note: If installing a lithium ion unit the lights
on the front will change colour after 20
seconds. If the colour is red please contact
Powervault or look at FAQs on the website.
FIGURE 4
Correct installation
Incorrect installation
FIGURE 23
Current clamp installation example