15
5 Specifications
1. Electrical input—refer to the UPS input specification.
2. Electrical output—refer to the UPS output specification.
Output socket group
Normal output
10A & 16A
Programmable output
10A & 16A
Outlet socket group (Programmable) can be set on the LCD or by sending command; it
could be sent between “always on” and “auto off-on”, and “always on” by default.
Once it is set as “auto off-on” that output power will turn off when battery capacity
below 50% in battery mode, and outlet socket group (Programmable) will turn on
again when charger begins to work.
3. Environment
Operating temperature
0~40
℃
full load
40~50
℃
derating to 50%
0~35
℃
IEC socket 16A
35~40
℃
IEC socket 10A
Storage temperature
-25 to 60°C
Transit temperature
-25 to 55°C
Relative humidity
0 to 95% no condensing
Operating altitude
<3000m (Derating use above 1km, the load should de-rating 1% every up
100m)
4. Criterion
Safety
IEC/EN 62040-1
EMC
IEC/EN 62040-2, C3
