4
3
Installation
The system may be installed only by qualified electricians in accordance with
applicable safety regulations.
3.1 Unpacking and Inspecting
Unpacking the unit in a low-temperature environment may cause condensation
occurred in and on the cabinet. Do not install the unit until the inside and outside
of the unit are absolutely dry (hazard of electric shock).
If any equipment has been damaged during shipment, keep the shipping cartons and
packing materials for the carrier or place of purchase and file a claim for shipping
damage. If you discover damage after acceptance, file a claim for concealed damage.
Note:
Discard or recycle the packaging in a responsible manner, or store it for future use.
Packing materials must be disposed in compliance with all local regulations concerning
waste. Recycling symbols are printed on the packing materials to facilitate sorting.
3.2 Checking the accessory kit
Verify that the following additional items are included with the unit:
MBP(1-1)
MBP(3-1)
Cables for UPS Input / Output
√
√
MBP detection cable
√
√
Copper bus-bar
√
Cable locker for
Output socket
√
√
Ear bracket(For tower install)
√
√
Rail kit(For rack install)
√
√
User manual
√
√
Note
：
√
---
Standard configuration;
O---Option, default is Not configured
