Installation
3
Powerware
®
5125 Installation Guide for IBM Applications
:
164201356 B
Uncontrolled Copy
Table 5. UPS Model Specifications
IBM Model Number
P33
Output Receptacles
(9) IEC 320-C13, (1) IEC 320-C19
Input Connection
16A, IEC 320-C20 input connector
Power Rating
3.0 kVA/2.7kW
Voltage
200–240V single-phase
Frequency
50/60 Hz, auto-sensing
NOTE
For more information refer to “Specifications” in the
Powerware 5125 User’s Guide.
UPS Setup
NOTE
If your UPS is already installed in an IBM pSeries (RS/6000) system, then skip
to “Installing Optional Equipment” on page 5.
Tools Required
To assemble the components, the following tools may be needed:
:
Medium flat-bladed screwdriver
:
#2 Phillips screwdriver
Checking the Battery Recharge Date
Check the battery recharge date label located on the UPS carton.
NOTE
If the battery recharge date has expired and the batteries have never been
recharged, contact your service representative (see “Service and Support” on page 13).
