5--2
Powerware 9315 Parallel Capacity/Redundant System with PHP SSBM
164201373 Rev. A
092402
5.2
To install a RIM:
1.
Securely mount the RIM.
2.
Install wiring from the RIM using ½-in. conduit through the cable entry panels
in the top of the SSBM control section (refer to the enclosed switchboard
vendor drawings for the location of the conduit landing plate).
3.
If not already installed, locate the RMP adapter cable assembly (see Figure
5---2) in the spare parts kit. Mate the DB---9 connector on the back of the
terminal block to the DB---9 connector (Port 1) on the Customer Interface Panel
of the SSBM (refer to Drawing 164201373---4 in Appendix A). Use two screws
from the spare parts kit to secure the terminal block bracket to the Customer
Interface Panel.
Connect to
Port 1 (DB---9) on
Customer Interface Panel
TERMINAL
BLOCK
FUSE
(TB3)
Figure 5---2. Terminal Block Bracket
Summary of Contents for 9315s
Page 205: ... 5HY ...
