IMPORTANT SAFETY INSTRUCTIONS
All operators must read, understand and practice the following safety instructions. They will be repeated occa-
sionally throughout this manual, and additional warnings may be added for specific cases.
- 3 -
IMPORTANT SAFEGUARDS:
This machine is designed to
be safe when used to perform the functions specified in the
Operator’s Manual. Should damage occur to electrical or
mechanical parts, the machine should be repaired by the
manufacturer or competent service station before using in
order to avoid further damage to the machine or physical
injury to user.
WARNING
: You must have training in the operations of
this machine before using it. READ THIS OPERATOR’S
MANUAL.
WARNING:
Machines can burn flammable materials and
vapors. Do not use this machine with or near fuels, or to
pick up grain dust, solvents, thinners, or other flammable
materials or liquids.
WARNING:
Do not operate this machine unless it is com-
pletely assembled.
WARNING:
Do not use this machine as a step or to move
furniture.
WARNING:
When disconnecting power cord from electri-
cal outlet, grasp the plug. Pulling it out by the cord itself
can damage cord insulation and internal connection to
plug. To prevent electric shock, always remove the electri-
cal plug from the electrical outlet before doing any repairs
or maintenance to this machine.
WARNING:
To prevent injury, always remove the electrical
plug from the electrical outlet before changing the pad or
brush and before leaving the machine.
WARNING:
To prevent injury, keep hands, feet and loose
clothing away from the rotating pad.
WARNING:
Maintenance and repairs must be done by
authorized personnel only.
WARNING:
Never attempt to make emergency repairs or
use non-original replacement parts.
WARNING:
DO NOT RUN OVER POWER CORD.
WARNING:
Never leave the machine unattended, particu-
larly when there are children present.
WARNING:
Keep all fasteners tight. Keep adjustments
according to specifications.
WARNING:
Always use a three-wire electrical system con-
nected to the electrical ground. For maximum protection
against electric shock, use a circuit that is protected by a
ground fault circuit interrupter. Consult with your electrical
contractor.
WARNING:
To prevent damage to the power cord, do not
let the pad, pad driver, wheels or squeegee touch the power
cord when the machine is running. Always lift the power
cord over the machine.
WARNING:
Make sure all labels, decals, warning, cautions
and instructions are fastened to the machine.
WARNING:
Operators must read and understand this
manual completely before operating this equipment.
WARNING:
Loose objects on the floor can become dan-
gerous projectiles if struck by the high-speed pad. Remove
them before operating this machine.
WARNING:
Keep machine moving to prevent damage to
finish or floor.
WARNING:
Do not operate this equipment in bare feet or
with open-toed shoes or sandals.
WARNING:
Store or park this machine on a level surface
only.
WARNING:
These machines are designed for level floor
operations only. DO NOT OPERATE on ramps or inclines
unless adequate personnel are available for assistance.
WARNING:
Keep the electrical parts of this machine dry.
Do not expose electrical components to water or other liq-
uids. To clean machine wipe down with a damp cloth.
Store machine in a building.
Powr-Flite Predator 16 Electric Auto Scrubber
Your new Powr-Flite
®
Electric Auto Scrubber will afford you many years of trouble-free operating satisfaction provided it is given
proper care. Prior to packaging, your Powr-Flite
®
Auto Scrubber was inspected by a Quality Control Technician.
UNCRATING
Your Powr-Flite
®
Electric Auto Scrubber was protectively packed to prevent damage in shipment. We suggest that upon removing
the unit from its carton, you carefully inspect it for any possible damage in transit. If damage is discovered, immediately notify the
transportation company who delivered your machine. As a manufacturer, we are unable to act upon any claim for concealed dam-
age; you must originate the claim.
