background image

WARNING: 

 

DO NOT OPERATE MACHINE OR CHARGER IN AREAS WHERE FLAMMABLE 

LIQUIDS OR GASES ARE PRESENT.

DO NOT USE OR PICK UP FLAMMABLE CHEMICALS OR LIQUIDS WITH 

THIS MACHINE.

• CAUTION:  

Operators must read and understand this manual  

 

completely before operating this equipment.

• CAUTION: 

  Make sure key switch is in the “OFF” position  

 

before installing pad.

• CAUTION: 

  Loose objects on the floor can become danger- 

 

ous projectiles if struck by the high-speed pad.   

 

Remove them before operating this machine.

• CAUTION: 

  Keep hands and feet away from revolving pad.

• CAUTION: 

  Keep machine moving to prevent damage to 

 

finish or floor.

• CAUTION: 

  Make sure key switch is turned “OFF” and 

 

battery connector is unplugged from machine  

 

before performing any maintenance procedures.

• CAUTION: 

  Maintenance and repairs must be performed by  

 

authorized personnel.

• CAUTION: 

  Battery acid can cause burns.  When working on  

 

or around batteries, wear protective clothing and  

 

safety glasses.  Remove metal jewelry.  Do not lay  

tools or metal objects on top of batteries.

• CAUTION: 

  Do not operate this equipment in bare feet or  

 

with open-toed shoes or sandals.

• CAUTION: 

  Charging batteries generate explosive gases. 

  

NO SMOKING OR OPEN FLAMES OR SPARKS.   

 

Make sure the charger has turned off before    

 

disconnecting it from the batteries.  Charge      

 

batteries in a well-ventilated area with the tanks in  

 

the raised and locked position.

• CAUTION:: 

 Store or park this machine on a level surface  

 

only.  Remove key from switch if machine is left  

 unattended.

• CAUTION:: 

 Do not operate machine or charger in areas  

 

where flammable liquids or gases are present.   

 

Do not use or pick up flammable chemicals or  

 

liquids with this machine.

• CAUTION: 

  Make sure all caution, warning an instructional  

 

decals are in place and legible. Replace  

 

damaged or missing labels.

• CAUTION: 

  These machines are designed for level floor 

 

operations only.  

DO NOT OPERATE

 on ramps or  

 

inclines unless adequate personnel are available  

 

for assistance.

• CAUTION: 

  Do not expose electrical components to water or  

 

other liquids.  To clean machine wipe down with  

 

a damp cloth.

IMPORTANT SAFETY INSTRUCTIONS

All operators must read, understand and practice the following safety instructions.  They will be repeated occasionally 

throughout this manual, and additional cautions may be added for specific cases.

- 1 -

Summary of Contents for PAS20DX

















Reviews: