10
WARNING:
This operation must be performed using protective gloves to protect yourself
from contact with dangerous solutions.
Squeegee Assembly
: Inspect and clean the squeegee assembly weekly and make sure to
restore it to its working condition. If the drying action is not perfect after cleaning the squeegee
assembly, remove and replace any worn rubber blades.
M1
M10
M15
M8
M8
M99
To replace the squeegee blades proceed as follows: drain the water from the dirty water tank,
remove the squeegee hose from the dirty water tank, pull the two pins to release the squeegee
assembly from the unit. Remove the wing nuts holding the squeegee retaining strap and remove
the squeegee blades. Install new squeegee blades in the reverse order.