12
SPLITTER OPERATION
Splitting - Two Hands Operation
This log splitter is equipped with
"ZHB" control system that requires
to be operated by both hands of the
user-Left hand controls the hydraulic
control lever while right hand controls
the pushbutton switch. The log splitter
will freeze upon absence of either
hand. Only after both hands release the
controls, the log pusher starts to return
backward to the starting position.
DELIVERING
LOG SPLITTER TO
WORK SITE
The log splitter is equipped with 2
wheels for minor moving. To move the
log splitter to the work site. Grip the
handle to tilt the log splitter slightly
after making sure the oil tank cover is
tightened.
For a Long Distance Transport
Fasten the log splitter at the positions
with bundling marks after lifting it into
the truck, to avoid free movement of
the log splitter.
If using a crane, lay hoist
sling at the lifting point.
Never try to lift the log
splitter at the Handle.
Application Conditions
This log splitter is a home use model.
It is designed for operating under
a m b i e n t t e m p e r a t u r e s b e t w e e n
+5°C and 40°C and for installation at
altitudes no more than 1000m above
M.S.L. The surrounding humidity should
be less than 50% at 40°C. It can be
stored or transported under ambient
temperatures between -25°C and 55°C.
Before operation, put the log splitter
on a 72-85 cm high, stable, flat, and
level work bench. Fix the support leg
using two bolts M8
×
35(A) on the hard
groundwork.
Our worktable is an optional accessory
with model no.02962 for 65575, please
contact the dealer if you need it.
720 mm ~ 850 mm
M8
×
35
(
×
2)
65575UK00M111.indd 12
2019/8/30 11:52:42
