Chapter 5 Function parameter
31
Ch
ap
ter 5
Tens digit: terminal command
binding frequency source
selection (0 to 9, same as units
digit)
Hundreds digit: communication
command binding frequency
source selection (0 to 9, same as
units digit)
55. F0.13 Acceleration time 1
0.00s to 6500s
Depends
on models
☆
56. F0.14 Deceleration time 1
0.00s to 6500s
Depends
on models
☆
57. F0.15 Ac/Deceleration time unit
0:1 second
；
1:0.1 second
；
2:0.01 second
1
★
58. F0.16
Ac/deceleration time reference
frequency
0: F0.19(maximum frequency)
1: Set frequency
2: 100Hz
0
★
59. F0.17
Carrier frequency adjustment as
per temperature
0: NO
；
1: YES
0
☆
60. F0.18 Carrier Frequency
0.5kHz to 16.0kHz
Depends
on models
☆
61. F0.19 Maximum output frequency
50.00Hz to 320.00Hz
50.00Hz
★
62. F0.20 Upper limit frequency source
0: F0.21 setting
1: AI1analog quantity setting
2: AI2 analog quantity setting
3: Panel potentiometer setting
4: High-speed pulse setting
5: communications reference
6:AI3 analog quantity setting
0
★
63. F0.21 Upper limit frequency
F0.23 (lower limit frequency)
to F0.19(maximum frequency)
50.00Hz
☆
64. F0.22 Upper limit frequency offset
0.00Hz to F0.19 (maximum
frequency)
0.00Hz
☆
65. F0.23 Lower limit frequency
0.00Hz to F0.21 (upper limit
frequency)
0.00Hz
☆
66. F0.24 Running direction
0:same direction
1: opposite direction
0
☆
67. F0.25 Reserve
68. F0.26 Reserve
69. F0.27 GF type
1.G type (constant torque load
type)
2.F type (fans/pumps load type)
-
●
