Chapter 5 Function parameter
74
Ch
ap
ter 5
digit
(0~1,same as the units digit)
For setting the digital input terminal of the active mode. When selecting high effective,
appropriate DI terminal and COM communicated effectively, disconnect invalid. Select is low
effective, appropriate DI terminal and COM connectivity invalid, disconnect effective
。
F1.37 DI1 delay time
0.0s~3600.0s
0.0s
★
F1.38 DI2 delay time
0.0s~3600.0s
0.0s
★
F1.39 DI3 delay time
0.0s~3600.0s
0.0s
★
DI terminal for setting status changes, changes in the delay time of the inverter.
Currently only DI1, DI2, DI3 with delay time setting function.
F1.40 Define the input terminal repeat
0
：
unrepeatable
；
1
：
repeatable
0
★
0: unrepeatable Two different multi-function input terminals can not be set to the same
function.
1: repeatable You can repeat two different multi-function input terminal can be set to the same
function.
F1.41 Keyboard potentiometer X1
0~100.00%
0.00%
☆
Keyboard potentiometer set value start point
F1.42 Keyboard potentiometer X2
0~100.00%
100.00%
☆
Keyboard potentiometer set value end point
F1.43 Keyboard potentiometer setting value
0~100.00%
-
☆
Display keyboard potentiometer value, through the keyboard potentiometer can modify
Settings under monitoring menu.
Keyboard potentiometer Settings can be used as frequency analogy, setting frequency =
maximum frequency x keyboard potentiometer Settings.
Eg.
：
Keyboard potentiometer Settings can be used as a PID given value
，
PID given value=
Keyboard potentiometer Settings.
F1.44
Keyboard potentiometer X1
correspondent value is Y1
-100.00%~+100.00%
0.00%
☆
F1.45
Keyboard potentiometer X2
correspondent value is Y2
-100.00%~+100.00%
100.00%
☆
The end of the
corresponding value
The start of the
corresponding value
end
start
The end of the
corresponding value
The start of the
corresponding value
end
start
Diagram 5-8:Keyboard potentiometer X correspondent value is Y
F1.46
Keyboard
potentiome
ter control
Units digit
Keyboard potentiometer power-down to save
state
00
☆
Power-down save
0
Power down zero clear
1
Tensdigit
Keyboard potentiometer setting stop keep
Stop keep
0
With stop command, zero clear
1
Cleared at the end of down time
2
Hundreds digit
Reserve
Thousands digit
Reserve
5-2-4.
Output terminal group
：
F2.00-F2.19
