5
TOOLS REQUIRED FOR INSTALLATION
Here are some tools required to install the operator:
ELECTRICAL INSTALLATION
For electrical installation, the network shall contain the following characteristics:
- Electrical network 230V;
- Have 5A circuit breakers in the electrical distribution box;
- 3/4" diameter conduit between the electrical distribution box and the total
shutdown device;
- 3/4" diameter conduit between the total shut-off device and the operator
connection point;
- 1/2" diameter conduits for external and optional pushbuttons;
- 1/2" diameter conduit for safety photocells (optional).
IMPORTANT
The device must be powered by a residual current (DR) device with a
rated residual current exceeding 30 mA.
PLIERS
SAWING BOW
SOCKET WRENCH
SCREWDRIVER
NUT WRENCH
LADDER
WELDING MACHINE
HAMMER
LEVEL
TAPE MEASURE
FRAME
DRILL
PENCIL
SANDER
