20
OUTPUT PLUG-IN MODULES
(OP2, OP3,OP4 & OP5)
The indicator supports 3 types of ‘Plug-in Modules’ that can be used as outputs (OP2, OP3, OP4 & OP5).The 3 types are; (a)
Relay /SSR Module, (b) DC Linear Voltage Module
and
(c)DC Linear Current Module. Each Module is provided with one 4-Pin
& one 5-Pin Female Socket that can directly fit into corresponding male plugs provided on either
Output PCB (OP2, OP3 &
OP4) or CPU PCB (OP5). Refer Figure9.5(a) & 9.5(b).
These modules are either pre-fitted while the indicator is shipped from
the factory or can be fitted later by the user.
5-Pin Female
Socket
4-Pin Female
Socket
Relay/SSR Module - Bottom View
Table 9.1
Figure 9.5(a)
User Manual
neuro 100EX
Relay
SSR Drive
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
Output Type Jumper Setting - B Jumper Setting - C
Output-1 Jumper Settings
