Ceiling Mount with a 7 Axis Extendable Arm and a 75-100mm VESA Screen Pan and Tilt Head
PN 80104-MICROS, PN 80104-20-MICROS, PN 80104-26-MICROS
9
info@practicalqualitysystems.com
WWW.PRACTICALQUALITYSYSTEMS.COM
(818) 993-1022
ALL PRODUCTS PATENT PENDING
Installation Tips for Screen Mounting Systems
•
1. 1 Installation of this assembly must be performed by qualifed persons.
•
1.2 Use fasteners that are appropriate for the materials and structure of the mounting surface.
Tips for locating KDS or POS
Screen Mounting Systems
•
1.1 Care must be taken when locating KDS or POS Screens so that the display can be easily seen by
the users (and in some cases touched); and also so that the screen does NOT block access to the pass
through window or items such as ingredients, plates, microwaves, etc. that are located on the adjacent
shelves.
•
1.2 As a general rule of thumb KDS and POS screens should be located to place the center of the
display at, or just above, eye level.
•
1.3 Most KDS screens are supported by mounting systems that are attached directly to the edge of
existing kitchen shelves above a production work station or expo area. POS Screens are most often
attached to counter tops, Under counter, shelve edges or walls.
•
1.4 Conduct a careful survey of each POS station, Kitchen work station or expo area. Stand where the
users will be standing at their work stations and consider all possible screen locations. Again ; the
screens should be located where they are readily accessible; but also where they do not limit access to
other important items in the work area.
PN 80104-MICROS
PN 80104-20-MICROS
PN 80104-26-MICROS
