PR Lighting LED Studio 3300D, Product Manual

4/16 

INSTALL THE PROJECTOR 

 
The unit

 hanging installation, not suitable for side hanging installation

The unit was designed to make installation easy: it can be rotated within 90

°

manually; its two side panels 

can be rotated within 180

°

manually.  

Take 1 clamps and 1 safety cord out from the package and mount 1 clamp on the mounting ring of fixture with 1 

retainer. Hang the fixture on the structure and fasten the screws attached to the clamp. Always ensure that the 
projector is firmly anchored to avoid vibration and slipping whilst functioning. Always ensure that the 
structure to which you are attaching the projector is secure and strong enough to support the weight of the 
fixture. For safety the projector should have a secondary fixing with a safety cord through the handle of the 
unit to ensure safe mounting.

 The tightness between the two light panels can be adjusted by the Allen key 

supplied. 
 

Warning:  
 
1.  The projector MUST be lifted or carried by the HANDLES instead of clamps. 

2. For safety the safety cord should afford 10 times of the unit’s weight.