2/10 PRO-PAR D manual_Last Revision_en .doc
SAFE USAGE OF THE PROJECTOR
3
INSTALLING THE PROJECTOR
4
FITTING THE LAMP
5
CHANGING THE LENS
5
KEEPING THE PROJECTOR CLEAN
6
POWER CONNECTIONS
6
TECHNICAL SPECIFICATIONS
7
Please note that as part of our ongoing commitment to continuous product development, specifications are subject to change without notice. Whilst
every care is taken in the preparation of this manual we reserve the right to change specifications in the course of product improvement. The publishers
cannot be held responsible for the accuracy of the information herein, or any consequence arising from them.
Every apparatus has been tested completely and packed properly by the manufacturer. Please make sure the packing and / or the apparatus is in good
condition before your installation and use. Should there be any damage caused by transportation, consult your dealer and do not use the apparatus. But
any damage caused by improper use will not be assumed by the manufacturer and / or dealer.
THESE ITEMS ARE PACKED TOGETHER WITH THE PROJECTOR
Clear, flat lens (14° Round beam shape) (1 PCS) (Order code: 070050017)
Stipple lens (19° Round beam shape) (1 PCS) (Order code: 070050016)
Fewer facets lens (21° x 34° Oblong beam shape) (1 PCS) (Order code: 070050014)
Many facets lens (30° x 51° Oblong beam shape) (1 PCS) (Order code: 070050015)
Gel frame (For installing the paper filter colour) (1 PCS)
Barndoors (1 SET)
G-bracket (1 PCS)
Locking knob (1 PCS)
Tool for uninstalling the lens (1 PCS)
Safety cord (1 PCS)
This manual (1 PCS)
Thank you for purchasing the product PRO-PAR D, PR-3040 D.
This product manual contains important information about the safe installation and use of this projector. Please read
and follow these instructions carefully and keep this manual in a safe place for future reference.
The PRO-PAR D is an innovative projector with an elegant housing made of high quality aluminiun-alloy with an
insulating painting finish. The product complies to CE norms and standards. It can be hung easily and safely. The
angle of inclination for the projector-body is convenient to be adjusted. The light beam can reach a long distance and
there are various kinds of lenses for your choice to produce different light beam effects. You can also use colour filter
which is installed inside the gel frame to produce the desirable beam colour. The projector is suitable for use in stage,
disco, or artistic applications.
ACCESSORIES
INDEX
INTRODUCTION
