6/10 PRO-PAR D manual_Last Revision_en .doc
To ensure the reliability of the projector it should be kept clean. The lens and reflector should be always cleaned to
maintain an optimum light output.
Do NOT use any glass cleaner or any type of solvent on the reflector.
Before cleaning the reflector remove the
lens so you can access the reflector from the front of the fixture. When cleaning the reflector use a damp, clean, soft,
lint-free cotton cloth with mild, soapy water solution and gently wipe the reflector, and then remove any soapy water
residue with a clean, soft, lint-free cotton cloth dampened with water.
Do not use paper towels or harsh materials to
wipe the reflector.
Cleaning frequency depends on the environment in which the fixture operates: damp, smoke or particularly dirty
surroundings can cause greater accumulation of dirt on the unit’
s optics. A soft cloth and typical glass cleaning
products should be used in cleaning. It is recommended to clean the lens at least once every 20 days and clean the
reflector at least once every 30 / 60 days.
Do not use any organic solvent, e.g. alcohol, to clean the housing of the projector.
The unit is supplied with a power cord. Should any other connections be required they must be carried out with the
following configuration: Earth = Green/Yellow cord.
KEEPING THE PROJECTOR CLEAN
POWER CONNECTIONS
