#75400026 PR S1 V3 TYPE R(FM) EVO 1/10 Electric 2WD Buggy PRO
The S1 V3 platform continues to evolve with a whole host of improvements to create the V3R Evo.
The main focus has been to make the car smoother and easier to drive on track, and this has
been achieved with a revised 2.5mm thick -5mm length 7075 aluminium chassis . In addition new
insert type hangers have been introduced, and in conjunction with the chassis design allow for
much lower rear roll centre, keeping the car much flatter on track with smoother rotation.
New Ackerman geometry, and new CNC rear hubs with longer link positons also improve on
track driveability. A new motor mount has been produced to lower the motor 2mm into a recess
in the chassis, and makes a particular difference on today’s high grip tracks. In addition to all the
geometry and mechanical changes, the V3R Evo has been treated to a new body, designed to
look sleek and offer more steering with it’s much larger forward mounted cabin.
2019 V3R Evo – Updates
• New 7075 2.5mm Thick -5mm Length Chassis
• New RR and RF Hangers with Pills
• New CNC Aluminium Rear hubs
• New Low Mount (-2mm) Motor Plate with Spur Protector
• New Ackerman Plate • High Tensile Turnbuckles – Ultra Strong • New Sleek Body
• New Grey Rod Ends and Shock Absorber Plastics
• New Foam Battery Spacers • New ZZ Ball Bearings
• Steel front Axles
• Alu5mm, 3 Degree Front Kick Up Block
In addition to all the updates the car is still packed with lots of items normally considered to be
option parts:
• CNC Alloy Servo Mounts
• 4 Degree Alloy Caster Blocks
• Front Camber Plates
• Vented Slipper Plates • Sway Bar Set
• 34 Tooth Alloy Idler Gear
