2
5909V101-IN
SyMBOL IDENTIFICATION
Triangle with an exclamation mark: Warning/demand. Potentially lethal
situations.
The CE mark proves the compliance of the device with the
requirements of the EU directives.
The double insulation symbol shows that the device is protected by
double or reinforced insulation.
WARNINg
When connected to SYSTEM 5000 by the communication cable,
this device can get connected to hazardous electric voltages.
Ignoring this warning can result in severe personal injury or
mechanical damage.
To avoid the risk of electric shock and fire, the safety instructions
of this manual must be observed and the guidelines followed.
The device must only be applied as described in the following.
Prior to the commissioning of the device, this manual must be
examined carefully.
Only qualified personnel (technicians) should use this device.
If the device is used in a manner not specified by the
manufacturer, the protection provided by the device may be
impaired.
gENERAL
WARNINg
The following operations must only be carried out on a device
that is not connected to SYSTEM 5000 and a PC:
Troubleshooting the device.
Repair of the device must be done by PR electronics A/S only.
hAZARD-
OUS
vOLTAgE
INSTAL-
TION
WARNINg
The female communication connector of SYSTEM 5000 is
connected to the input terminals on which dangerous voltages
can occur. It must only be connected to the programming unit
5909 by way of the attached communication cable.
CONTENTS
