Operation
TV Channel selection
To select a TV channel, just enter the two digits, such as "27". The new channel num-
ber is then selected as soon as the second digit is entered. In cable mode, all channel
numbers 1 to 99 are valid; only 00 is invalid and will be ignored. In ANT mode, only
channel numbers 2 to 69 are valid; invalid channel numbers are ignored.
FM frequency selection
To switch from TV mode to FM mode, first press the "Enter" key, then enter in the 3
or 4-digit FM frequency, such as "965" for 96.5 or "1013" for 101.3 MHz. Note that the
decimal point is not entered, since it doesn't exist on the remote. The valid frequency
range is from 87.7 up to 107.9 MHz.
While in FM mode, it is not necessary to press the "Enter" key before the frequency;
just enter in the new frequency to be selected. Of course, it doesn't make any differ-
ence if the "Enter" key is pressed first.
To change back from FM mode to TV mode, enter in the two-digit channel number,
such as "12", then press the "Enter" key. The new TV channel is then selected. In
other words, to select the FM mode, the "Enter" key is pressed
BEFORE
the fre-
quency is entered, but to select the TV mode the "Enter" key is pressed
AFTER
the
new channel number is entered.
Page 6
CATV Tuner User's Manual
