20
Charging the Battery by USB
You can also charge the battery by connecting the USB cable to your camera
and PC.
1.
Connect the camera with the USB
cable as shown.
2.
Connect the other end with the
USB adapter and plug it into a
power outlet or into the PCs USB
port.
•
When the battery is charging,
the LED indicator flashes.
•
When the battery is fully
charged, the LED indicator goes
off.
•
When the battery is unusually
charged, the LED indicator flashes
rapidly.
•
When the camera charges without
the battery inside, the LED
indicator goes off.
•
It's recommended to not operate the camera when charging.
Actual charging time depends on current battery capacity and
charging conditions.
•
You can also charge the battery with an Apple adapter. Its power
output meets the standard 5V/500mA.
•
If the battery is removed during charging, it will only recover
charging after you unplug and replug the USB.
Turning the Power On and Off
There are two ways to turn on the camera:
•
The startup image displays briefly and the startup sound plays if enabled.
The zoom lens extends and the camera is turned on in Record mode.
•
The camera is turned on in Playback mode. The zoom lens is not extended.
To turn off the camera, press the
Power button
.
See "Modes" on page 21 to know more about Record and Playback mode.