Model SG-100 Plasma Spray Gun
Operator’s
Manual
_____________________________________________________________________________________________________________________
Issued: 12/11
Page
44
8. Insert anode into gun. Align slot in anode face with guide pin on front
housing of gun.
9. Push anode into place. When properly seated, the face of the anode
will seat flush with the front housing.
Figure 5-4. SG-100 Gun, assembled view
10. Reinstall front cover plate (item 1) and secure onto gun with three
socket head cap screws (item 13) removed in Step 2.
11.
Reinstall powder tube (item 9) and secure onto gun with two socket
head cap screws (item 12) removed in Step 1.