11
STEP 3 |
INSTALLING MB STANDOFFS
SLANTED VARIATION
M3 MB
SCREW
12MM MB
STANDOFF
Install your
12mm standoffs (part 3)
and your
M3 motherboard
screws (Item 8)
to the motherboard tray. Ensure that you’re
placing them in the correct location according to your
motherboard layout. You can also use a drill at it’s
lowest
setting to screw in the standoffs to the motherboard screws.
STEP 4 |
MB & GPU BRACKET INSTALL
SLANTED VARIATION
After your standoffs are installed, place your motherboard
and hand tighten the
M3 nuts (part 1)
to properly secure your
board. Then use
2 M4x6 (part 2)
and install the GPU bracket as
illustrated in Figure 4.1.
M3 NUT
FIGURE 4.1
M4X6
