PREBENA
Wilfried Bornemann GmbH & Co. KG
BEFESTIGUNGSTECHNIK
– FASTENING TECHNOLOGY
31
10
Transport, storage and disposal
DO NOT SET UP UNDER OSCILLATING LOADS!
10.1
Transport
The compressor must be packaged appropriately for transport, and may only be
transported in covered trucks, railway wagons or containers.
The loading and unloading operations must be conducted in accordance with the
delivery dates on the packaging and in compliance with health and safety
regulations.
When lifting, transporting and packaging the compressor:
completely disconnect the compressor from the power supply and air system;
decompress the pressure vessel to atmospheric air pressure level;
secure movable and loose parts;
Align the weight and dimensions of the compressor with the data in this manual,
use appropriate devices with sufficient capacity and lift the compressor as little
as possible.
DANGER: WHEN USING A FORKLIFT, THE COMPRESSOR MUST BE ON A
PALLET; IN ORDER TO PREVENT A FALL, SET THE FORKS TO AS SMALL A
DISTANCE APART AS POSSIBLE!
10.2
Storage
Make sure that the compressor is kept with the manufacturer's packaging inside a
building, where it is protected from environmental influences. Temperature conditions
of 25
С below zero to 50
С above zero and a relative humidity up to 80 % at 25
С
above zero must be maintained.
CAUTION! PROTECT THE COMPRESSOR STORAGE LOCATION FROM ACID FUMES
AND ALKALI, AGGRESSIVE GASES AND OTHER CONTAMINANTS
10.3
Disposal
Waste oils, used filters and condensate must be disposed of in accordance with
environmental legislation.
DANGER: COMPRESSORS WITH AIR DRYERS: THE AIR DRYER CONTAINS A
REFRIGERANT GAS AND OIL IN A CLOSED CIRCUIT. THE AIR DRYER MUST
BE DISMANTLED AND DISPOSED OF BY AN AUTHORIZED ORGANIZATION
(OR PERSON).
Summary of Contents for SK-15-10
