Maintenance
of compressor
17
Cleaning the casing and external surfaces
WARNING!
Damage of compressor or its components due to the use of unsuitable cleanser.
For cleaning use only dry, slightly dampened duster or the duster soaked in a mild soap solution.
Light contamination
Clean the compressor casing with a dry duster.
Lubricate all metal parts of the compressor with a thin layer of special oil Prebena.
Strong contamination
Connect the air gun to the compressor (1) and clean all ribbed
parts with compressed air.
Clean the compressor casing using a duster slightly dampened
in a mild soap solution.
Finally wipe the casing using a duster slightly dampened in tap
water.
Completely wipe with a dry, soft duster.
Lubricate all metal parts of the compressor with a thin layer of
special oil Prebena.
Cleaning the air filter
Effective cleaning of absorbing air is one of the most important conditions for long compressor life.
WARNING!
Compressor damage due to ingress foreign objects into the suction hole.
The compressor must not be running without the air filter.
Do not blow the suction hole using the air gun. Foreign objects can come into the hole.
To clean the air filter, proceed as follows:
Turn the cover (1) of air filter counter-clockwise. The cover is
unlocked.
Remove the cover (1) from the air filter casing (2).
Remove the filter bush (3) and clean it using an air gun. If nec-
essary, replace the filter bush.
Insert the filter bush (3).
Put the cover (1) on the air filter casing (2).
Block the cover by turning it clockwise.
Summary of Contents for VITAS 45
Page 24: ...Notes 24 Notes...
