Helios Large Display Dual-Input Meter Instruction Manual
PD2-6060
46
Advanced Features Menu
To simplify the setup process, functions not needed for most applications are located in the
Advanced
Features
menu.
Press and hold the Menu button for three seconds to access the advanced features of the meter.
Advanced Features Menu & Display Messages
The following table shows the functions and messages of the
Advanced Features
menu in the order they
appear in the menu.
Display
Parameter Action/Setting
filtEr
Filter
Set noise filter value
Ch-A
Channel A
Set filter value for
channel A
Ch-b
Channel B
Set filter value for
channel B
bypASs
Bypass
Set filter bypass
value
Ch-A
Channel A
Set filter bypass
value for channel A
Ch-b
Channel B
Set filter bypass
value for channel B
Round
Round
Set the rounding
value for display
variables
seriAl
Serial
Set serial
communication
parameters
SlaveId
Slave ID
Set slave ID or
meter address
baud
Baud rate
Select baud rate
Tr dLY
Transmit
delay
Set transmit delay
for serial
communication
Display
Parameter Action/Setting
Parity
Parity
Select parity: Even,
Odd, or None with 1
or 2 stop bits
t-byt
Time byte
Set byte-to-byte
timeout
SelEct
Select
Enter the Select
menu (function,
cutoff, out)
Functn
Signal
input
conditionin
g
Select linear, square
root, programmable
exponent, or round
horizontal tank
function
Ch-A
Channel A
Select menu for
channel A
Ch-b
Channel B
Select menu for
channel B
Linear
Linear
Set meter for linear
function and select
number of
linearization points
No PtS
Number of
points
Set the number of
linearization points
(default: 2)
Square
Square
root
Set meter for square
root extraction
www.
.com
information@itm.com
1.800.561.8187
