P
RO
V
U
™ PD6088/PD6089 Modbus
®
Scanner
Instruction Manual
46
Scaling the 4-20 mA Analog
Output (
Aout
)
The 4-20 mA analog outputs can be scaled to provide
a 4-20 mA signal for any display range selected. The
Analog Outputs can be mapped to PVs or Math
Channels. To select the channel and source
assignments the analog outputs are assigned to, see
Analog Output Source Programming
(
aoutpr
) on
page
58
.
No equipment is needed to scale the analog outputs;
simply program the display values to the
corresponding mA output signal.
The
Analog Output
menu is used to program the
4-20 mA outputs based on display values.
There are three analog outputs available. These only
display when they are enabled. See graphic below.
Notes: Changes to the settings are saved to memory
only after pressing ENTER. Changes made to
settings prior to pressing ENTER are not saved.
Once ENTER is pressed, the display moves to the
next menu.
*
*
* If Installed
