7
CLEANING/MAINTENANCE
WARNING
Turn the Easy Comp Compressor off and disconnect
from power source before cleaning.
To clean the filter (weekly):
1. Unplug Compressor.
2. Pry off filter end cap to check air filter for dust buildup.
3. If dust buildup occurs, remove air filter and wash in warm,
soapy water and rinse.
4. Absorb excess water from filter with a dry towel.
5. Return filter and end cap.
Cleaning for Exterior Components:
Use a clean cloth or sponge dampened with soap and water.
Wipe dry with a clean cloth or paper towel.
CAUTION
Excessive dust buildup on filter will reduce performance of
Compressor. If this occurs, clean or replace with a new filter.
The air filter does not filter out saline.
Treatments using
nebulized saline will draw the saline mist back into the
Compressor. Saline cause rapid deterioration of the
compressor seals and will void the warranty.
Summary of Contents for EasyComp PM50-3HG
Page 1: ...Model PM50 3HG shown...
