background image

Before beginning, disconnect the negative (-) terminal of the battery prior to working on the
positive (+) terminal to prevent a short to ground.

4

9

Reverse left and right RCA outputs.

OPPOSITE CHANNEL

Reverse RCA inputs

OPPOSITE CHANNEL

Reverse RCAs at head unit

(check Balance Control)

SAME CHANNEL

Problem is in the amplifier, speakers or associated wiring of

the silent channel.

YES

Check Input cables for signal

by connecting them straight

to the amplifier.

YES

Problem is in the FRX-456.

See your local Authorized

Precision

Power

 Dealer

or call 1-800-62POWER

NO

Check Input cables for signal

by connecting them straight

to the amplifier.

NO

Problem is elsewhere in

the system. Check head

unit and amplifiers.

ANY SOUND NOW?

 SOUND IS NOW IN

 SOUND IS NOW IN

 SOUND IS NOW IN

SAME CHANNEL

Problem is in the FRX-456. See your local Authorized

Precision

Power 

Dealer or call 1-800-62

POWER

.

SAME CHANNEL

Problem is in the RCA cable.

OPPOSITE CHANNEL

Problem is in the head unit.

Check crossover frequencies for Low Pass points set higher than High Pass points,
check level control setting for sub and rear Fill, and check gain control on the affected
amplifier(s).
STILL LOW OUTPUT- See your Authorized 

PPI Dealer or call 1-800-62POWER.

Summary of Contents for G41810









Reviews: