Fig. 3
3/4” Flat Washer
Cotter Pin
Axle Slot
Fig. 1
Ref.
No.
Part
No.
1 1840 1/2”x 1-3/4” Clevis Pin
2 1248 5/16” x 3/4” Hex Head Bolt
3 1042 #14 Hitch Pin Clip
4 1044 5/16” Flat Washer
5 1276 5/16” Lock Washer
6 1275 5/16” Hex Head Nut
7 3739 3/4” In Diam. x 2” Flat Washer
8 1264
3/4” Flat Washer
9 1262 1/8” x 1-1/4” Cotter Pin
1
6
1
6
6
6
4
2
2
Part Description
Hardware
Sack Qty.
Trailer Sprayer
ASSEMBLY INSTRUCTIONS & PARTS LIST
03/05
PRECISION PRODUCTS, INC.
3736-6
Assembly Hardware
Assembly Instructions
Cart Body Assembly Parts
LIMITED WARRANTY
This unit is warranted against defects in materials and workmanship to the original
purchaser, under normal use and service, for a period of ninety (90) days from date
of sale. During the Warranty Period, we will repair or replace at our option free of
charge to the original purchaser, any part of the Unit that our examination shows to
be defective in workmanship or materials. This Warranty
apply to damage
caused by misuse, abuse, neglect, accident, normal wear, or alterations by
unauthorized persons.
Does Not
The electric pump on this model has its own warranty. Precision Products, Inc. does not carry
a warranty on the pump. Please refer to the parts list and operation manual for the pump
included with this model.
PRECISION PRODUCTS, INC.
Fig. 3
Tools needed for assembly:
Two 1/2” Wrenches
1 Pair Needle Nose Pliers
1
2
3
5
8
9
7
6
4
Fig. 2
3/4” Diameter x 2”
Flat Washers
Axle
1/2”x 1-3/4” Clevis Pin
5/16” x 3/4” Hex Head Bolt
#14 Hitch Pin Clip
5/16” Flat Washer
5/16” Lock Washer
5/16” Hex Head Nut
3/4” Diameter x 2” Flat Washer
3/4” Flat Washer
1/8” x 1-1/4” Cotter Pin
5/16” x 1/2” Hex Head Bolt
1
2
4
42
6
3
43
44
7
10
5
8
9
2
4
45
47
5
6
5
6
6
2
4
5/16” Lock
Washers
Fig. 4
5/16” x 1” Hex
Head Bolts
5/16” Flat
Washers
Clevis
5/16” Hex
Head Nuts
46
STEP 1
Insert Axle through Axle Slot on Cart Body. Once the Axle is through the hole, slide on one 3/4” x 2” Flat Washer(7) then the
Axle Tube Spacer(44), then slide the Axle through to the end of the Axle Tube Spacer. Add another 3/4” x 2” Flat Washer (inside
of the Sprayer Cart body) and push the Axle through the other hole on the Cart Body. Once the Axle is through the second hole,
slide on a 3/4” ID x 2” Flat Washer(7), (Fig.2). Now slide on a wheel followed by a 3/4” Flat Washer(8) and then secure with
a Cotter Pin(9). Repeat this for both Wheels. Use Needle Nose Pliers to bend back ends of the Cotter Pin,(Fig.3). Repeat for
other side. Using 5/16” x 3/4” Hex Head Bolts(2), 5/16” Flat Washers(4), 5/16” Lock Washers(5), and 5/16” Hex Head Nuts(6)
attach Clevis, (42),(on topside of Cart Body) to the Cart Body (Fig. 4). Tighten Bolts with 1/2” wrenches. Insert Clevis Pin(1)
through Clevis and secure with #14 Hitch Pin Clip(3) underneath Cart Body.
1
2
3
4
5
6
7
8
9
10
Ref.
Part Description
Part Number Qty.
1840
1248
1042
1044
1276
1275
3739
1264
1262
1249
1
6
1
6
10
6
4
2
2
4
42
43
44
45
46
47
Ref.
Part Description
Part Number Qty.
Clevis
Axle
Axle Tube Spacer
10” Pneumatic Wheel for TCT
TCT Cart Body
Boom Mount
1243P
3769
3767
3768
3740R
3766R
1
1
1
2
1
1
**Part quantities includes pieces assembled at factory
and those in hardware sack.
TCT15
TCT15RT
Cart Body
3/4” Diameter x 2”
Flat Washers
Axle Spacer
5
When ordering parts, always give model number,
part description, & part number.
Precision Products, Inc.
Parts Division
(217)735-1590
316 Limit Street
(217)735-2435
Lincoln, IL 62656
or visit us on the world wide web :www.precisionprodinc.com
Send To:
Phone
Fax
Customer Service
CUSTOMER SUPPORT
At Precision Products, Inc. delivering quality, value and outstanding service is our goal.
However, sometimes parts do become damaged or lost during transport from our facilities to
the store.
If you have any problems, please do not return this merchandise to the store.
Call us and we will take care of any problem you may have with this unit.
