8
Figure 5
1‖ Spring
5/16‖ Hex Head Nut
5/16‖ Flat Washer
5/16‖ x 1—3/4‖ Hex Head Bolt
5. Assemble Row Marker to Row Marker Bracket using 5/16‖ x 1—3/4‖ Hex Head Bolt, 5/16‖ Flat Washer,
Spring then another 5/16‖ Flat Washer and a 5/16‖ Lock Nut. Do not fully tighten hardware. Allow Row
Marker Tube to pivot from side to side. See Figure 5.
5
2. Insert the Upper Handle Tube into Lower Handle Tube and place Seed Cover between Handle Tubes and
Seed Hopper then secure with two 1/4‖ x 1– 1/4‖ Hex Head Bolts and two 1/4‖ Hex Head Nuts removed in
step 1. Attach Row Marker Clip to the top of the Upper Handle. See Figure 2.
Upper Handle
1/4‖ Hex Head Nuts
1/4‖ x 1—1/4‖ Hex
Head Bolt
1/4‖ x 1—1/4‖ Hex
Head Bolt
Figure 2
Upper Handle Tube
Seed Cover
Row Marker Clip
