1 Basic safety notes
© Precitec GmbH & Co. KG • EN 09/2019
1 - 7
1.6.7
Noise occurring during the laser cutting process
With high cutting gas pressure the noise level is >75 dB(A). Noise emitted by
the cutting gas depends on the operating conditions.
To ensure that individuals are not harmed by noise, the manufacturer of the
system / machine must implement or provide written information on relevant
safety measures which must be observed by the operator.
1.7
Storage and transport
To prevent damaging the unit during storage or transport the
following basic rules must be observed:
• Keep the storage temperature within the range specified in
the Technical Data sheet.
• Adopt suitable measures to avoid damage due to humidity,
vibration or impact.
• Do not store the unit within or in the vicinity of magnetic fields
(e.g. permanent magnet or strong alternating field)
.
1.8
What to do in emergency situations
• Disconnect the machine from the power supply; set the main switch
to AUS
('OFF')
.
• Only use
Class B
extinguishers to extinguish fires,
e.g. CO
2
extinguishers
(carbon dioxide)
.
