5.5 Care and maintenance of the protective window cartridge
5 - 46
© Precitec GmbH & Co. KG • EN 09/2019
5.5.2
Replacing axial gaskets
Fig. 5-5
Maintenance: Seal
(protective window cartridge
)
Attention – Clean workplace!
Only carry out any maintenance and replacement work on the cartridge in a
clean workplace.
Do not allow dust and dirt to get into the laser head. Dust and firmly adhering
dirt can damage or destroy the components.
1
Sealing ring
DR
(axial gasket P0580-53353)
2
Cartridge
LC-B
A-oRig
1
Coolant spray
2
To keep the laser head working reliably in normal operation,
Precitec
recommends that the radial seal
(1)
is replaced once a year.
Regularly check the cartridge for leaks.
Damaged gaskets or seals must be replaced.
Spray the coolant onto the new sealing ring
(after removal of the damaged one)
and click it into the cartridge.
Caution – Ambient temperature!
Different materials such as aluminium, steel and plastic have different thermal
expansion coefficients. If the ambient temperature drops below 10 °C, you
must check that the sealing ring is positioned correctly, especially when
replacing the cartridge.
