5 Maintenance
© Precitec GmbH & Co. KG • EN 09/2019
5 - 47
5.6
Maintaining the sensor insert
5.6.1
Cleaning the inside of the sensor insert
(removing short circuits)
Fig. 5-6
Maintenance: Sensor insert
(removing short circuits)
Removing the sensor insert
Attention – Clean workplace!
Only carry out any maintenance and repair work on the laser head in a clean
workplace.
Do not allow dust and dirt to get into the laser head. Dust and firmly adhering
dirt can damage or destroy the components.
1
3
80°
2
4
4
5
6
6
LC-
BA-oSE1k
1
Nozzle
DE
, ceramic part
KT
4
Sensor insert
SE
2
O-ring
(Ø26.00 x 1.50 Viton)
5
Protective window module
3
Spatter protection plate
PP
6
Cleaning pad
(small)
1.
Undo the screws
(2x hexagonal screws SW7)
and remove the spatter protection plate (3).
2.
Undo the cylinder head screws
(4x Allen screws SW5)
and remove the sensor insert (4).
