5 Maintenance
© Precitec GmbH & Co. KG • EN 09/2019
5 - 49
5.6.2
Replacing the sensor insert
Fig. 5-7
Maintenance: Sensor insert
(replacement)
Removing the sensor insert
You
must
have a new sensor insert
(SE)
ready at hand before you start
replacing the old one.
Unscrew the nozzle, undo the screws and remove the ceramic part.
An adjustable hook spanner size 40/42 (available as an accessory) can be used for easy
removal of the nut.
F200
(2 x VA)
SE100
6
LC-BA-oSE1
1
2
3
4
5
F150
(1 x VA)
1
Nozzle
DE CON
, ceramic part
KT
4
Sensor insert
SE100
2
O-ring
(Ø26.00 x 1.50 Viton)
5
Protective window module
3
Spatter protection plate
PP
6
Extension adapter
VA
1.
Undo the screws
(2x
hexagonal screws SW7
)
and remove the spatter protection plate (3).
2.
Undo the fixing screws
(4x
Allen screws SW5
)
and remove the sensor insert (4).
Note:
Depending on the version, up to two extension adapters are fitted.
