5.17 Ellipitical Fitness Crosstrainer
Page 6
Section Three - Checking EFX 5.17 Operation
This section provides you with a quick method of checking EFX operation. Check the operation
of the EFX at the end of most maintenance procedures.
Procedure
1.
Plug the power adapter’s power cord into the wall outlet, the power adapter’s jack into the
EFX 5.17 and set the on/off switch in the “on” position.
2.
Select Resistance Level 1.
3.
Operate the EFX for 4–5 minutes. As you operate the EFX, concentrate on the operating
sounds made by the unit. Be on the alert for unusual rubbing, hitting, grinding, or squeaking
noises.
4.
If the EFX makes unusual noises or the electronic display does not change appropriately,
troubleshoot per section 6.
5.
Press the
RESISTANCE
key until you reach Resistance Level 5. Operate the EFX for
another 2–3 minutes.
6.
If the EFX resistance does not change or the operation of the EFX feels inconsistent
compared with Resistance Level 1, troubleshoot per section 6.
7.
Press the
RESISTANCE
key until you reach Resistance Level 10. Operate the EFX for
another 2–3 minutes.
8.
If the resistance of the EFX 5.17 does not change or the EFX operation feels inconsistent
with Resistance Levels 1 and 5, troubleshoot per Procedure 6.5.
9.
Press the
CROSSRAMP
key while viewing the electronic console. Confirm that the foot
pads incline and the ramp display increments to 7 as the
CROSSRAMP
key is pressed.
10. Press the
CROSSRAMP
key while viewing the electronic console. Confirm that the foot
pads return to the lowest position and the ramp display decrements to 1 as the
CROSSRAMP
key is pressed.
11. If the ramp system of the EFX 5.17 does not operate properly, troubleshoot per Procedure
6.4.
12. Turn off the EFX with the circuit breaker, then unplug the power adapter’s power cord from
the wall outlet.
