Precor 9.41s, User Manual

9.41S, 9.41Si Treadmill

Page 11

Procedure 2.6 - Selecting United States Standard or Metric 

Units (Units Built After July 20, 1997)

The diagnostic program used prior to July 21, 1997 and the diagnostic program used after July 
20, 1997 are essentially the same except that the key strokes used to access the programs are 
different. Units built after July 20, 1997 used the standard access codes. The keys on the display 
are hypothetically numbered for 1 to 7 from left to right. Therefore, 

ENTER

 would be key 1, 

INCLINE

▼ 

would be key 2, etc. (see Diagram 2.1) or on a 9.41Si 

INCLINE

▲ 

would be key 1, 

INCLINE

▼ 

would be key 2, etc. (see Diagram 2.2). 

Selecting United States standard units causes information to be displayed in feet, miles and 
pounds. Information is displayed in meters, kilometers and kilograms if metric units are selected. 
After you have selected a measurement standard, the software compiles and records workout 
information in the units of the measurement standard selected. Changing to the alternate 
measurement standard after your workout has started will cause invalid data to be displayed. For 
this reason, change the measurement standard only after turning ON the treadmill.

Procedure

1.

Plug the power cord into the wall outlet, then turn on the treadmill with the circuit breaker.

b.

With the Enter Your Weight banner scrolling, press keys 

RESET,5,6,7

,1, sequentially. 

The message 

Press 

▲

 for MPH or 

▼

 for KPH

 will scroll across the screen.

c.

Use the 

SPEED

 or 

INCLINE 

keys to select the measurement standard. The banner 

scrolling across the electronic console acknowledges the measurement standard selected.

d.

The message 

Press 

▲

 for Distance or 

▼

 for Time or Reset to Ask 

scrolls across the 

console.

IF...

THEN...

Distance is selected

When M9.41S Treadmill custom 
courses are selected, the User will be 
prompted to enter workout distance.

Time is selected

When M9.41S Treadmill custom 
courses are selected, the User will be 
prompted to enter workout time.

Ask is selected

When M9.41S Treadmill custom 
courses are selected, the User will be 
prompted to enter either workout 
distance or time.