9.41S, 9.41Si Treadmill
Page 14
Section Three - Checking Treadmill Operation
This section provides you with a quick method of checking treadmill operation. Check treadmill
operation at the end of a maintenance procedure and when it is necessary to ensure that the
treadmill is operating properly.
Procedure
1.
Plug the power cord into the wall outlet, then turn on the treadmill with the circuit breaker.
2.
Adjust the speed of the running belt to 2–3 m.p.h.
3.
Operate the treadmill for at least 5 minutes.
4.
Concentrate on the feel of the running belt and the sound of the drive motor and rollers. Be
on the alert for unusual noises, smells, or vibrations.
5.
Measure and log the AC input current under loaded and unloaded conditions.
6.
Press the
CHANGE
key while observing the LEDs on the electronic console. Make sure that
each LED lights as the information corresponding to that LED is displayed on the electronic
console.
7.
Press the
STOP
key. When the treadmill comes to a stop, press the
CHANGE
key and view
the electronic console as the treadmill scans time, speed, distance, and percent.
8.
Press the
INCLINE
▲
key while viewing the electronic console. Confirm that the running
bed inclines and the incline display increments to twelve percent as the
INCLINE
▲
key is
pressed.
9.
Press the
INCLINE
▼
key while viewing the electronic console. Confirm that the running bed
returns to a level position and the incline display decrements to zero percent as the
INCLINE
▼
key is pressed.
10. Turn off the treadmill with the circuit breaker, then unplug the treadmill from the wall outlet.
