9.41S, 9.41Si Treadmill
Page 28
Replacing the Lift Motor
7.
With the treadmill still on its side, line up the mounting holes at the top of the lift motor with
the lift motor mounting holes on the treadmill frame.
8.
While an assistant holds the lift motor in place, position the bolt through the top of the lift
motor and the treadmill frame. Thread the nut onto the bolt.
9.
Calibrate the lift assembly as described in Section Four of this appendix.
10. Replace the bolt and nut that secure the lift tube to the lift platform.
11. Return the treadmill to an upright position.
12. Secure the ground wire to the lift motor ground stud on the treadmill frame.
13. Connect the lift motor wiring assembly to the lower PCA.
14. Check the operation of the treadmill as described in Section Three of this appendix, then
replace the hood.
