9.41S, 9.41Si Treadmill
Page 7
Note:
When the running belt is started, the number of power bits will be displayed. Power bits represent
the amount of power applied to the drive motor. Power bits are product of selected speed and
applied load.
g.
Press the
SPEED
▲
and
▼
keys. Verify that the power bits number increments and
decrements as the
SPEED
keys are pressed.
h.
Press the
STOP
key to exit the power bits mode and enter the heart rate mode.
i.
If the heart rate option has been installed, you may test the heart rate function using a
chest strap transmitter or test transmitter.
j.
Press the
ENTER
key to enter the error code log. The error code log will display the
last 10 errors that occurred. Error 1 will be the most recent error and error 10 will be the
oldest error. If more than 10 errors occur, the most recent error will be inserted in position 1
and all other errors will be pushed down one position. The error that was in the 10th position
will be lost. If you wish to clear the error code log, press the
QUICK START
and
STOP
keys,
simultaneously.
k.
Press the
ENTER
key to exit the error code log and enter the key pad test.
l.
Press each key one at a time the display will confirm the key that was pressed. Press
the
INCLINE
▼
and
SPEED
▲
keys, simultaneously to exit the keypad test.
m.
The next test is the circuit breaker test. Follow the instructions on the display to cause
either a test trip of the treadmill circuit breaker or exit the diagnostics program.
Diagram 2.2 - 9.41Si Display
