C554i Self Powered Elliptical Fitness Crosstrainer
Page 9
Procedure 3.3 - Displaying the Odometer
Procedure
1.
Start pedalling and continue to pedal as you perform step 2.
2.
With the
PRECOR
banner scrolling, press keys
RESET,6,5
, sequentially.
3.
The message
INFORMATION DISPLAY
will be displayed for a few seconds.
4.
The message
ODOMETER
will be displayed followed by the total number of strides
accumulated. The total number of strides can be converted to miles by dividing by 2241 or
to kilometers by dividing by 1392.5. Press the
ENTER
key to advance to total strides.
5.
The message
TOTAL STRIDES
will be displayed followed by the total number of strides
logged on the C554i. Press the
ENTER
key to advance to hour meter.
6.
The message
HOUR METER
will be displayed followed by the total number of hours that
the EFX has been in use. Press the
ENTER
key to advance to software version.
7.
The message
SOFTWARE VERSION
will be displayed followed by the software versions of
the upper and lower PCA’s. For example,
UPPER 1.01 LOWER 1.01
. Press the
ENTER
key
to advance to error log.
The message
ERROR LOG
will be displayed followed by the error in log position 1. Each log
entry shows the log position, the stride count when the error occurred and the hour meter when
the error occurred. For example;
1 ER21 123456 STR 45678 HRS
. The error log can record up
to ten error conditions. The error code in position one will be the most recent error and the error
in position ten will be the oldest error. If more than ten errors have been logged, only the ten most
recent will be displayed. When a new error is logged, each the
and
keys to move through
the log. Pressing and holding the
QUICK START
key for four seconds will clear the log. Press the
ENTER
key to exit the odometer program.
