EFX 885, 835, 825
Service Manual 20039-166
Page 58
©2011 Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
3.
See Diagnostic Software Menu Table
Diagnostic Software Menu - Table
Test
Type
Action
Descriptions
Display
Test
Press keys
PAUSE,5,1,7,6,5,7,6,1,
sequentially.
Hardware Validation
will scroll across the display followed by
DISPLAY TEST
.
Press
OK
key
will illuminate on the display. Check the display to ensure
that all LED segments are illuminated.
Press the
OK
key four more times
To display the remaining LED groups. Check each display group to ensure that all LED
segments are illuminated.
Press the
BACK
key to return to
Hardware Validation
Keyboard
Test
Press the
key
KEYBOARD TEST
will scroll across the display
Press the
OK
key
A representation of all of the keys on the console will be displayed. Pressing a key on the
console will cause the illuminated representation of that key to turn off. Press all of the
keys on the console to ensure that all of the keys are functioning.
Press and hold the
BACK
key for
5
seconds
to return to
Hardware
Validation
Heart Rate
Test
Press the
key
HEART RATE
will be displayed.
Press the
OK
key
Grasp both of the heart rate grips on the handlebar, after a couple of seconds the heart rate
will be displayed in the heart rate and smart rate displays.
Use chest strap transmitter or a test transmitter to test the wireless heart rate function,
after a couple of seconds the heart rate will be displayed in the heart rate and smart rate
displays.
Press the
BACK
key to return to
Hardware Validation
Machine
Test
Press the
key
MACHINE TEST
will scroll across the display.
Press the
OK
key
You may now proceed to one of the four Machine tests. Press the
key once to access the
Brake test, twice to access the Incline test, three times to access the RPM test, or four times
to access the Battery test.
Press the
key
BRAKE TEST
will be displayed.
Press the
OK
key
The console will display the power bits (PWRB). Changing the resistance
,
keys will
change the power bit settings.
Press the
BACK
key to return to
MACHINE TEST
Press the
key
INCLINE TEST
will be displayed.
Press the
OK
key
The console will display the analog to digital (A/D) incline position number and the incline
position in percent of incline. Press the inline
,
keys to operate the incline throughout
its range.
Press the
BACK
key to return to
MACHINE TEST
Press the
key
RPM Test
will be displayed.
Press the
OK
key
The console will display the Pulse. The pulse is showing a count of zero crossings from the
generator. RPM shows a software averaged version of pulse.
Summary of Contents for EFX 825
Page 15: ......
