EFX 885, 835, 825
Service Manual 20039-166
Page 60
©2011 Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Procedure 5.2 P30 Displaying Information
The information display will access the following data;
Odometer
Hour Meter
U-Boot Software
U-Base Software
Lower Software
Metric Board Software
Serial Number
Usage log
Error Log
Procedure
1.
See Displaying Information Menu - Table
Displaying Information Menu -Table
Displayed
Information
Action
Description
Diagnostics
Information
With the
PRECOR
banner scrolling,
press the keys
PAUSE,6,5,
sequentially.
Use the
,
keys to move to the
desired display shown in the list
above.
DIAGS _ INFORMATION
will scroll across the display. Followed by
ODOMETER
.
Odometer
Press the
OK
key.
The odometer will display distance in
STRIDES
only.
Note:
The odometer data is stored in non-volatile memory on the upper PCA.
If the upper PCA is replaced the odometer data will be lost.
Press the
BACK
key to exit the
odometer display.
Hour Meter
Use the
,
keys to move to
move to
HOUR METER
.
Press the
OK
key.
The operating time of the unit will be displayed as
12345 HOURS
. The
operating time is defined as total amount of time that the unit has operated in
program mode. The hour meter is also used to provide the time stamp for the
error code log.
Press the
BACK
key to exit the
HOUR METER
display.
U-Boot SW
Use the
,
keys to move to
move to
U-BOOT SW
.
Press the
OK
key.
The software part number will be displayed as
XXXXX-XXX
.
Summary of Contents for EFX 825
Page 15: ......
