Procedure 2.1 - Accessing the Service Mode
The EFX service mode software cycles through the following tests:
Upper and Lower Software Versions
Key Test
Factory Set
Display Test
Procedure
1.
Plug the power cord into the wall outlet, then turn on the EFX with the on/off switch.
2.
While pressing and holding the
ENTER
key, press the
RESET
,
QUICK START
and
RESISTANCE
S
keys, sequentially.
Diagram 2.1 - 5.25 Display
Summary of Contents for EFX EFX 5.23
Page 79: ...Block Diagram 8 2 5 23 5 25...