General Information
The following information provides general equipment and service information that will help
you to use this manual to properly repair and maintain the treadmill.
Features
The equipment operating specifications.
Feature
Specification
Consoles
LED consoles: P30, P30i and P31
Touchscreen consoles: P62 and P82
Incline
Elevation system generates up to 1000 lb / 453.6 kg of thrust and
operated in compression for reliable operation.
Range: 0% - 15% in 0.5% increments.
Speed
Range: 0.0 - 12 mph in 0.5 increments (0.0 - 19.3 kph) in 0.1 kph
increments)
Auto Stop
Auto stop is a safety feature that shuts off a treadmill that has been
abandoned while the belt is running. Exclusive of the first sixty
seconds after a workout has begun or resumed, any 30 second
window with no user detected will prompt a 10 second countdown
and then a full stop. The detection is accomplished through soft-
ware and is rated to detect persons weighing 50 lbs (22.7kg) or
greater walking with a normal cadence.
The feature is selectable ON or OFF in the facility settings menus.
It is default from the factory set to ON, and it is recommended to be
set ON.
Belt/Deck
Belt:
Uses the Forbo brand belt with pre-waxed reversible deck.
Running surface: 60" x 22" (153 x 56 cm)
Deck:
The deck is a one-inch Slik-Dek bed with a thin layer of wax to
assist in the break-in of the new belt / deck system. The deck is
composed of 52 lb / 23.6 kg high-density fiberboard core with phen-
olic laminate bonded on both sides. Can be flipped to double life.
Drive/Take-up Rollers
Steel tapered rollers keep the belt centered to reduce main-
tenance.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 5
2 General Information
Features
