Removal Instructions
1. Remove the Drive Access cover see
.
2. Remove the left and right drive disk and Drive Top covers, see
.
3. Remove the left and right Stairarms from the Input Crank, see
4. Remove the Drive Housing covers see
5. Use a 1/2" socket to loosen the two Drive Components assembly fastener nuts (left
side). Do not remove the fastener nuts.
6. Use a 1/2" socket to loosen first stage belt tensioner and walk the first stage drive belt off
the pulleys. Remove the first stage drive belt. Retain belt for installation.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 118
6 Replacement Procedures
Input Drive Assembly Replacement