7. Use a 9/16" socket to remove the four fasteners (bolts and washers) and remove the
Input Drive Assembly. Discard the four Nylock bolt fasteners (these bolts cannot be
reused for installation). Retain washers for installation.
CAUTION
: Do not reuse the Input Assy Nylock patch bolt fasteners for installation.
Discard the used bolts and order new bolts for installation (see
,
bubble # 296).
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 119
6 Replacement Procedures
Input Drive Assembly Replacement