Installation Instructions
1. Reinstall the Input Drive Assembly onto the weldment input module mounting bracket
and secure using four NEW Nylock patch bolt fasteners (see
,
bubble # 296). The removed washers can be reused for installation.
Torque
1
to 300 +/-
90 in-lbs (34 +/- 10 Nm).
CAUTION
: Do not reuse the Crank and Input Bearing Assy Nylock patch bolt fasten-
ers for installation. Discard the bolts and order new bolts for installation (see
, bubble # 296).
1
Torque is a measure of the force that can cause an object to rotate about an axis. Bolt/nut
example: 5 NM torque is equivalent to 5 newton's of force applied one meter from the center of
the bolt, 6 ft-lb is equivalent to 6 lbs of force applied 1 foot away from the center of the bolt.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 120
6 Replacement Procedures
Input Drive Assembly Replacement