3. Disconnect the Positive (Red) and Negative (Black) battery terminal cables.
4. Remove the following LPCA interface cables:
a. Disconnect the Generator (J1) cable
.
b. Disconnect the Eddy/Brake (J7) cable
.
c. Disconnect the Lift (J3) cable
.
d. Disconnect the Battery (J9) cable
.
e. Disconnect the Comm Serial (J2) cable
.
f. Disconnect the Active Status Light (J12) cable
.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 137
6 Replacement Procedures
LPCA (Lower PCA) Board Replacement