1. Reinstall the Linkarm onto the Stairarm (moving arm models only):
a. Make sure the Linkarm Transition cover is installed onto the Stairarm weldment
Linkarm Mount.
b. Position the Inner Linkarm cover onto the Linkarm and then install the Linkarm
onto the Stairarm weldment Linkarm Mount. Secure using 9/16" hex head cap
screw and torque to 300 +/- 90 in-lbs (34 +/- 10 Nm).
c. Reinstall the Outer Linkarm Cover and secure using the #2 Phillips screw.
2. Reinstall the Stairarm wheels onto the ramp. Carefully place the wheels onto the back
of the track and then slide the wheels up the ramp.
Stairarm Input Drive Crank Installation
3. Reinstall the Stairarm onto the input drive Crank Spindle:
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 151
6 Replacement Procedures
Stairarm Replacement
